Coatings Sealants

  • Fiberset PM

    Fiberset PM is a pre-mixed “lockdown” sealing treatment for microscopic residual asbestos fibers present after the removal of Asbestos Containing Material (ACM). Fiberset PM is a ready-to-use, Class “I” fire-rated coating that provides a flexible barrier over residual asbestos fibers to ensure final air clearance. Fiberset PM is UL® classified for use as a primer for fireproofing replacement materials under the “Encapsulant Materials” section of the UL directory, and is compatible with most leading brands of flooring adhesives. Fiberset PM is a water-based, non-toxic coating that employs advanced 100% acrylic resin technology to extend the life expectancy of airless spray equipment.

    Details »
  • Foster® 40-50™

    Foster® 40-50™ Mold Resistant Coating is the highest quality, low viscosity mold resistant coating on the market today. It also provides ideal protection of its surface in areas prone to mold growth.
    Can be used on a variety of surfaces such as wood studs, OSB, plywood, painted surfaces, wallboard, masonry and metal.

    Details »
  • Foster® 40-51™

    Foster® 40-51™ Mold Resistant Clear Coat has a low viscosity, which allows it to be easily applied by hand or with virtually any type of airless spray system. It works well on a wide variety of surfaces: wood, painted surfaces, wall board, masonry surfaces and metal. Over time, Foster® 40-51™ will be highly resistant to staining caused by chemicals, mold or mildew.

    Details »
  • Penewet Asbestos Wetting Compound

    Removing friable asbestos-containing material (ACM) can send clouds of fibers and dust billowing into the workplace. Spraying with Penewet eliminates the hazard by wetting the ACM and making it safe to handle. A surface treated with Penewet stays wet at least 5 times longer than surfaces treated with simple detergent solutions. Penewet’s chemically advanced wetting/penetrating/binding action saturates the entire mass of ACM. So it's easy to scrape and bag the damp, asbestos containing material without releasing dangerous asbestos fibers.

    Details »
  • Recon Smoke Odor Sealer

    RECON Smoke Odor Sealer is a revolutionary solvent free smoke odor sealant and stain blocker designed to encapsulate malodors on multiple surfaces and block the toughest stains. RECON Smoke Odor Sealer with OdorLock technology is water based, permeable and is not flammable. Unlike typical water based coatings that “wick” smoke odors and stains out of the substrate as they dry, RECON Smoke Odor Sealer with OdorLock technology prevents smoke odors and stains from migrating through the coating while maintaining its breathability. This technology provides one coat odor control on most surfaces and continues to block odors even with seasonal changes in temperature and humidity. RECON Smoke Odor Sealer is your final step to encapsulate residual odors typically found on fire damage restoration projects.

    Details »
  • Soot Seal

    Soot Seal is a water based polymer encapsulant sealer that forms a protective coating that will encapsulate and seal contaminates.  The protective coating seals surfaces and encapsulates particulates.  Soot Seal can be used to prevent cross-contamination of airborne particulate during structural drying and dehumidification.

    Details »
  • Un-Flame

    A clear, odorless, water-based liquid protectant, Un-Flame renders suitable materials flameproof. Un-Flame inhibits  oxidation and produces a thin layer or char which stops flame spread and further combustion and actually extinguishes the fire.

    Details »
  • Unsoot #1

    Unsoot #1’s long-lasting barrier helps prevent the release of particulates, thereby helping to improve indoor air quality and occupant comfort after restoration. Use on structural wood, or for sealing duct work and ceiling plenums after fires, smoke damage, or oil burner puff-backs.

    Details »
  • Unsoot #2

    Seals and protects surfaces with long lasting film that protects against mold, mildew, and bacterial growth.

    When dry, Unsoot #2 creates a coating that resists microbial growth for up to two years. Apply on furnace ducts and vents or other hard surfaces.

    Details »