Abatement Technologies® PRED1200

The lightweight Abatement PRED1200 Portable Air Scrubber (PAS) delivers outstanding air scrubbing performance in an ultra-strong, rotational molded polyethylene cabinet. Weighing only 70 pounds with filters, the PRED1200 produces an eye-popping peak airflow rating of 900 cfm at 3.5 amps or less!

The PRED1200 PAS removes hazardous airborne particles from water restoration, construction and renovation zones in several filter stages.

The PRED1200 features a built-in, two-wheel dolly and durable handle for maximum portability. The GFCI-protected duplex receptacle allows multiple units to be daisy-chained on one 15-amp outlet. 

ItemProduct #
Predator 1200E204-PRED1200
  • Virtually Indestructible Cabinet: High-density, TEFGARD® polyethylene cabinet is strong, tough and easy to clean
  • Powerful Airflow: Variable speed airflow rated up to 900 CFM. Provides 6 ACH @ 6,000-8,000 ft³
  • Resin Protectant: Microbial growth and UV inhibitors infused into the cabinet resin protect cabinet integrity and protect against cabinet deterioration
  • Flexible Operation: Can operate in the upright or horizontal position as space allows
  • User-Friendly Controls: A complete array of convenient controls enables users to continuously monitor the operating status of the PRED1200
  • Simple Filter Access: Convenient hinged rear pre-filter access door provides quick access to filters
  • Superior Mobility: Built-in dolly with solid handle rolls easily on the job with one worker on 8” diameter smooth, non-marking rear wheels
  • Safety First: NRTL-certified to comply with UL Std. 507 & CAN/CSA  Std. #C22.2 No. 113-M1984 for electrical safety. Meets UL94HB flammability requirements for polymer cabinets housing energized electrical components
  • 230 Volt/50 Hz AC Model: PRED1200TF PAS runs on 230 Volt/50 Hz current (1,000-1,250 m³/hr.)

Airflow*: 300-900 CFM

Air Changes Per Hour: 6 ACH @ 6,000-8,000 ft³

Power Supply Requirements: 120 volts AC, 60Hz, 15 amps

Normal Operating Amps - 3.5 amps or less (Daisy-chain multiple units on one 15 amp circuit)

Motorized Impeller - Motorized impeller rated for 100,000 hours with thermal overload protection, auto reset, 60Hz, single-phase

Circuit Breaker - 12 amps

Safety First - NRTL-certified to comply with UL Std. 507 & CAN/CSA Std. #C22.2 No. 113-M1984 for electrical safety

Cabinet Material - UL94HB flame retardant resin with EPA-Registered microbial inhibitor

Built-in Dolly - Two-wheel dolly consisting of 8” solid, non-marking rubber rear wheels, 360° swivel front casters and a secure top handle for gripping

Pre-Filter Access - Hinged door secured by rotating latches. Full perimeter gasket seals to protect against bypass of dirty air

Filters:

  • Stage 1 pre-filter - 1” coarse particulate pre-filter (MERV 4)
  • Stage 2 pre-filter - 2” pleated particulate pre-filter (MERV 6)
  • Optional stage 3 pre-filter - VAPOR-LOCK® carbon filter (MERV 7) or a second 2” pleated particulate pre-filter (MERV 4)
  • Final stage HEPA filter - Long-life true HEPA tested and certified to an efficiency of 99.97% or higher for 0.3 micron particles; does not rely on an electrostatic charge to maintain 99.97% HEPA efficiency

Dimensions: 22” L x 24” W x 42” H

Net Weight with Filters: 70 pounds

Shipping Weight: 95 lbs

*Airflow ratings are based on third party testing conducted @ 120 VAC with clean filters in accordance with generally accepted testing methods using highly accurate electronic flow measurement equipment. Different testing methods may produce higher or lower results. Ratings have been rounded off to the nearest 50 CFM for convenience.